The Smart Lamp

A minimalist DIY Smart Lamp using WLED with HomeAssistant. In my case, I use this lamp as a nightlight in the hallway, and on top of that, 2 LEDs are used for notifications (like a garbage reminder). Boost MeBOM:2 WAGO 221-613WS2812B 16 LED RingWemos D1 MiniUSB C Socket Links:16 LED RingUSB C SocketWAGOs Installation:As easy as it shows in the picture. Press the USB C Socket into its hole. Connect everything to the WAGOs, place them in their holders. Then stick the D1 Mini in its holder and finally click the LED Ring into its position. Paint over the onboard LED or use a small piece of tape to cover it on the D1 Mini. Alternatively, you can desolder it completely. WAGO 1:Red Line from USB C Socket5V Line from D1 Mini5V Line from LED Ring WAGO 2:Black Line from USB C SocketGND Line from D1 MiniGND Line from LED Ring Pin D4 of the Wemos D1 Mini connects to the Di (Data In) of the LED Ring. I used a connector for this to be able to disconnect everything. <figure