The Time Machine

The time machine.

Here is my take on how to build a UV curing with as few components as possible.

I have attached a few pictures of a cnc controller that I have built in the same way (I will post the cnc controllers later, in a new design)

Her is some of the parts i use.

one 12 v DC Worm Drive Reduction Gear Motor
https://www.aliexpress.com/item/32888516359.html?spm=a2g0o.cart.0.0.3c843c00dNba1P&mp=1

5 meter UV LED strip
one Snap In Rocker Switch
one yyc 2s pcb
one Limit Switch ENDSTOP RAMPS
one set Female and Male Housing + terminals SM-2P
one Push Button Metal
one 8 mm magnet

Print the parts, in PLA. the top, sides can be laser cut in 4 mm withe acryl or 3d printet.
The wire between the top and bottom, has a 2 pin connector, so the top can some of.
The DXF files are if you want to laser cut some of the parts in acrylic or MDF

The only modification i made is on the YYC 2S pcb, I have moved relay and connector to the backside of the PBC.
And the ac