The ULTIMATE 3d printer test!

This is an all-in-one printer test. This will test your printers bridging/cooling, ghosting (this is, correct me if I am wrong, how well it can print a thick wall) , Z-wobble, overhang capabilities, stringing, and tolerances. This is a demanding print. Just a small note, on the tolerance test, the 0.1 millimeter test does not always print apart from the main body. Sometimes the slicer will merge it to the main part. Also, the tolerance test is very demanding, it is more difficult than a normal one. however, it still works, other than the fact that if your printer can normally handle 0.3 tolerances, it might only make it to 0.4 mm tolerances for this one. Print settings: Layer height: 0.15Infill: doesn't matterMaterial: PlaSpeed: normal, but if you want to really test the printer, crank up the speeds! (you can find a separate speed test at https://makerworld.com/en/models/674288?from=searchBoost MePlease leave a like and/or boost me if you liked this and want more like it.