Thermal Camera

Thermal Camera Using Teensy 4.0 and AMG8833

The Gerber files (and schematic) were used to build the Camera shown in Video.
Two Frames for the TFT (depends on your placement of PCB/TFT)
• ADDED Gerber Files with Aligned Pad/Drill Holes for user's convenience.
• ADDED Smaller Housing and Lid's (2)
-The Smaller Housing (Chopped) eliminates the section for Batteries and Power-Dongle storage. Adds hole on side to pass power-wire out (suggest adding your favorite power connector to it after assembly).
-The Lids: 1-same as original w/o storage section, 2-Eliminates Button hole for small button.

Video is posted Here at YouTube https://www.youtube.com/watch?v=v5V6r8rhEYA&list=PLU_C9afJ9z7VFw9Hf-SUJykonZlZ6nOtw&index=8&ab_channel=BruceT
(it may also be at the end of the Photo's strip above...)

Depending on your printed parts and assembly and positioning of items (Switches, PCB... etc) Some ‘manual’ Hand-Tweaking may be needed (mostly filing and/or notching out some plastic). Try