Thingiverse
Thin Wall Tester
von MakerUnit
32
Downloads
18
Likes
0
Makes
Hi everybody,
I made a thin wall stress test that ranges from 2 mm to 0.4 mm. This will test the accuracy of your printer when printing thin walls.
Instructions:
1. Print the file with the recommend print settings.
2. Remove the test from the build plate carefully.
3. Measure the widths of the rings.
4. Compare the measurements.
I made a thin wall stress test that ranges from 2 mm to 0.4 mm. This will test the accuracy of your printer when printing thin walls.
Instructions:
1. Print the file with the recommend print settings.
2. Remove the test from the build plate carefully.
3. Measure the widths of the rings.
4. Compare the measurements.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
