ThinkCentre Tiny 10" Rack Mount

Building out my homelab on a 10" rack — wanted a consistent, clean aesthetic across all my mounts so I designed my own. This one's for the ThinkCentre M700 Tiny. Compatibility Personally tested with M700 Tiny. The M900 and M900x share the same chassis dimensions and rubber feet positions, so they should fit too — but I haven't verified those personally. If you print one, let me know in the comments whether it fits your model! Note: although many ThinkCentre Tiny models share the same outer dimensions, the rubber feet positions vary between generations. This bracket is designed around the M700/M900/M900x foot layout and will likely not fit other Tiny models such as the M93/M93p, M710, M910q or M720.ThinkCentre M700 Tiny ✓ testedThinkCentre M900 Tiny — should fitThinkCentre M900x Tiny — should fit Print settingsMaterial: PETG recommended (or higher) to avoid heat deformationLayer height: 0.2mmInfill: 10% gyroid or higher for sidesFront panel: 25% gyroid infill, 4 walls, 4/6 b