Thor - Open Source, 3D printable Robotic Arm

Hello, I&#39;m Sergi and I thought this was a great project, so I&#39;ve gathered all the STL files and set them up in the slicer to simplify the printing process. Additionally, one of the necessary STLs was not on Angel&#39;s Thingiverse post but was on his website, so I&#39;ve added it here as well. Essentially, I just wanted to contribute to this fantastic project created by Angel. Below, you will find the instructions for the project that Angel has created.SummaryImportant Note: I suggest you to go to Thor&#39;s Website or Thor GitHub Repository in order to download the latest version!<hr/>Thor is an Open Source and printable robot arm with six degrees of freedom.Its configuration (yaw-roll-roll-yaw-roll-yaw) is the same used by most of the manipulator robots on the market. In its extended position, Thor is about 625mm high and can lift loads up to 750 grams.The project started in 2015 as a final degree project called “Design and impplementation of an Open Source, 3D printed 6DOF r