Thingiverse

thread creation exercise

von UltiArjan

622 Downloads

480 Likes

4 Makes

Zum Modell

a small container and 2 "soda bottle cap containers" made to test thread creation in Design spark mechanical

creating threads using revolve in "Design Spark Mechanical"

- base cilinder diameter for the bolt = 12,5 mm
- inside cilinder diameter used for the nut = 13 mm
- placed the faces used for the thread cutting 0,5mm "inside" the base cilender (did not use the complete face), you'll find the used faces in the DesignSpark file (the smallest is used for the bolt, the biggest for the nut, to get some additional marging.
- I think normal metric thread has a 30 degree angle, but I used 45 degrees for better printability.

This is where I learned how to do it ....

http://www.rs-online.com/designspark/electronics/eng/knowledge-item/designspark-mechanical-thread-creation

capsule design Designspark designspark mechanical design s design sp rsdoc thread threaded Treaded capsule design Designspark designspark mechanical design s design sp rsdoc thread threaded Treaded

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat