Thingiverse
Thrust Tool
von jmajew
7
Downloads
5
Likes
0
Makes
The ThrustTool is a DIY tool for measurements of an electric motor with propeller. It allows to measure thrust, torque, rotation speed, battery voltage and current.
The tool is built around two load cells - in the version I have built I used: 1kG for torque and 2kG for thrust - they allow measurements with resolution around 0.1G for thrust and 0.25 Gcm for torque.
The measurements are performed by the custom electronic board and managed by PC application. The custom board can be replaced by a standard STM32 Nucleo F401RE board with additional 2 load cell ADCs HX711.
More details (stl and step files, firmware, PC application, custom PCB board) can be found at:
https://github.com/jmajew/thrust_tool
Example of final report generated by PC application can be found here:
https://github.com/jmajew/thrust_tool/blob/main/ThrustApp/data/tmotor-mn2206/mn2206_hqprop6x3-5_3s.pdf
_Note_:
Photo and 3d views show the tool with the lock in its place which is used to protect the loa
The tool is built around two load cells - in the version I have built I used: 1kG for torque and 2kG for thrust - they allow measurements with resolution around 0.1G for thrust and 0.25 Gcm for torque.
The measurements are performed by the custom electronic board and managed by PC application. The custom board can be replaced by a standard STM32 Nucleo F401RE board with additional 2 load cell ADCs HX711.
More details (stl and step files, firmware, PC application, custom PCB board) can be found at:
https://github.com/jmajew/thrust_tool
Example of final report generated by PC application can be found here:
https://github.com/jmajew/thrust_tool/blob/main/ThrustApp/data/tmotor-mn2206/mn2206_hqprop6x3-5_3s.pdf
_Note_:
Photo and 3d views show the tool with the lock in its place which is used to protect the loa
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
