Tifa (FF7) - HueForge Print

I am very much #TeamTifa for Cloud, so this print was a no brainer. This is a fairly simple print, just under 4 hours, with only 4 different colours. So only 1 AMS needed, or 3 manual colour swaps. The included 3MF has all the necessary settings and filament swaps applied to the print if you use Bambu Studio. If you don't, or want to use your own settings - please use the STL and follow the instructions below! If you resize this print, please do not alter the Z height. Only alter the X and Y dimensions! Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA+ Overture Dark Blue Transmission Distance: 4PLA META Sunlu Teal Transmission Distance: 5.4PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #20 (0.96mm) swap to Dark BlueAt layer #23 (1.08mm) swap to TealAt layer #30 (1.36mm) swap to Jade White for the rest.___________________________________