Tiger

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in size. You may print at higher layer heights below the Base Thickness of 0.56mm. The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm.Filaments Used:PLA ******+ Black Transmission Distance: 0.3PLA ****** + White Transmission Distance: 6This print uses 2 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to White for the rest.