Tiger

Tiger hueforge print A picture of a tiger from the Zoo from Washington State Point of Defence Zoo Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x113.33mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.3mm and the Actual Depth is 1.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to White for the rest. AMS user. Ensure the correct filament is in the right slots and double-check your settings.