Thingiverse
Tile Leveling System
by johnyHV
87
Downloads
79
Likes
0
Makes
Tile Spacers For Flooring Wall Tile Spacer Carrelage Tile Leveling System
- Recyclable.
- Easy to use
- Balance tiles in the same horizontal position.
- Improve the installation speed of tile.
- Reduce the fatigue/pressure of installers.
- Prevent tiles from moving during solidification.
---
Two version screw for print.
- First version is printed on the height.
- Second version is printed on the width. Second version is better for mechanical stress
Both version don't need support for print
---
Mechanical parts:
- As fuse we can use standard solid copper wire with diameter 1.5mm2 (16 AWG), with length ~11mm
- Steel Needles, Length: 32mm, Thickness: 1.5mm
for example this (Replacement Steel Needles for Ceramic Tile Leveling System Clips Wedges Spacers Floor Tile Laying Construction Tools) :
https://vi.aliexpress.com/item/1005005621269441.html?spm=a2g0o.productlist.main.3.7e6a50CN50CNJv&algo_pvid=81236714-b983-4dac-a87c-dbc812662da9&algo_exp_id=81236714-b983-4dac-a87c-dbc812662
- Recyclable.
- Easy to use
- Balance tiles in the same horizontal position.
- Improve the installation speed of tile.
- Reduce the fatigue/pressure of installers.
- Prevent tiles from moving during solidification.
---
Two version screw for print.
- First version is printed on the height.
- Second version is printed on the width. Second version is better for mechanical stress
Both version don't need support for print
---
Mechanical parts:
- As fuse we can use standard solid copper wire with diameter 1.5mm2 (16 AWG), with length ~11mm
- Steel Needles, Length: 32mm, Thickness: 1.5mm
for example this (Replacement Steel Needles for Ceramic Tile Leveling System Clips Wedges Spacers Floor Tile Laying Construction Tools) :
https://vi.aliexpress.com/item/1005005621269441.html?spm=a2g0o.productlist.main.3.7e6a50CN50CNJv&algo_pvid=81236714-b983-4dac-a87c-dbc812662da9&algo_exp_id=81236714-b983-4dac-a87c-dbc812662
johnyHV also publishes on
52 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
