Tinkerbell lines

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Yellow Transmission Distance: 6PLA Kexcelled Sky Blue Transmission Distance: 2.6PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #12 (1.04mm) swap to Blue GrayAt layer #17 (1.44mm) swap to YellowAt layer #19 (1.6mm) swap to Sky BlueAt layer #26 (2.16mm) swap to Jade White for the rest.