Tiny Magnetic Latch

A simple magnetic latch I've made for myself, along with a support bracket for better stability.In the project is included a magnet holder with a rounded edge on one side, a bracket with either a left or right rounded edge, a magnet holder with two rounded edges and a bracket with two rounded edges. Simply enable/disable or duplicate the parts you need and print away.Update 29/03/25: Added two new options for D4x2 magnets.I printed on Bambu A1, using a 0.2mm nozzle but it should print fine on a 0.4mm as well, used Bambu PLA and printed by object. These magnets are fairly strong and I've found a single latch is often enough as seen on the photos for my drone storage box.You will need: 2 D8x2 or 2 D4x2 Round magnets and superglue.The magnet holder is designed to be friction fitted and no glue is required for it to hold the magnet in place, before slotting the magnet in place make sure the polarity is correct or you will end with two pieces that repel each other (although that cou