ToolBox

A toolbox, one 200 x 80 mm and one for the mini 160 x 64 mm Plate 1: The main boxPlate 2: The other boxes, print 4 of this (and observe the rounded corners!!)Plate 3: The tilts (Note that Plate 8 is an alternative, slightly larger hole)Plate 4: Plugs for the tiltsPlate 5: Pluts for the tilts with the handles (1 mm longer than Plate 4)Plate 6: Lid, print two of thisPlate 7: Handle, print two of thisPlate 8: An alternative to plate 3, larger hole 4.2 mm instead of 4.0 mm Look at the pictures to see how the toolbox should be assembled. Plate 2: Mind the rounded corners (easy to get it wrong!). Should be on the outside! It's not that difficult, but it can be very challenging. Be patient! If the holes on plate 3 are too small, then you should use the ones on plate 8 instead! Use some sort of tool, e.g. a plier etc… Boost MeThanks!