Thingiverse
Toploader deck box
por grathxvi
15
Descargas
9
Likes
0
Makes
Magic: The Gathering deckbox, designed to hold an EDH deck with the commander in a top loader used to close the box.
Deckbox.stl and DeckboxLid.stl are scaled for double-sleeved cards, whereas Deckbox60.stl and DeckboxLid60.stl are scaled for single-sleeved.
In my experience, the intended mechanical closure for the lid (slide it on with the rails, then lock it into the pegs) didn't work that well. I ended up printing the box in ABS and then welded the top on with acetone; if you go that route, you may wish to edit the source .scad files to remove the rails and just use the pegs for alignment.
Deckbox.stl and DeckboxLid.stl are scaled for double-sleeved cards, whereas Deckbox60.stl and DeckboxLid60.stl are scaled for single-sleeved.
In my experience, the intended mechanical closure for the lid (slide it on with the rails, then lock it into the pegs) didn't work that well. I ended up printing the box in ABS and then welded the top on with acetone; if you go that route, you may wish to edit the source .scad files to remove the rails and just use the pegs for alignment.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
