Torre Pot, Stackable planter

I hope that this stackable desing helps you to put a bit of green on your life PETG recommended Tested with 3 floors, but although it can handle more then you will need to check how you are going to irrigate the lower floors. The base is not mandatory, specially in the outside. Two files. The first is for the pot floor, the second is the base. Print as many floors as you want. Feel free to scale if you need it, but remember to put the same value in the two files. Print Instrucctions 0.2 layer height, but you can also use a higher value 3 walls arachne 0.2 infill gyroid or cubic 1mm bottom and top