Tortoise

Project: TortoisePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm This print uses 7 unique filaments PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA BambuLab Basic Dark Gray PLA BambuLab Matte Dark Green PLA BambuLab Matte Ash Gray PLA BambuLab Matte Ice Blue PLA BambuLab Matte Ivory White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #11 (0.96mm) swap to Dark Gray At layer #12 (1.04mm) swap to Dark Green At layer #14 (1.2mm) swap to Ash Gray At layer #19 (1.6mm) swap to Ice Blue At layer #21 (1.76mm) swap to Ivory White for the rest.