TP-Link VX231v Mounting Bracket

A bracket to neatly mount a TP-Link VX231x Wi-Fi 6 Modem Router inside a Hager VU36NW multimedia distribution box.Before you comment: I don't use the Wi-Fi of this modem, it is turned off. I use a separate Wi-Fi Mesh system (TP-Link Deco Mesh) outside this box that is connected via Ethernet to this modem.Print Guide:You can print it however you like. I've used default 2 walls and Gyroid infill.I recommend PLA+/PLA Tough or PETG. Regular PLA is too brittle because see below.Installation:Each bracket is slided on the modem from the side. As the cutouts in the bracket are exactly fitted to the slightly bend design of the modem, the brackets will fit and stop sliding around 2cm from each edge.Each bracket is marked with an arrow on its outside pointing up, showing you which bracked goes on which side and which side is up. The clamps for the metal back plate of the distribution box have to be slightly bend to clamp onto the metal backplate (that is why regular PLA is not recommended).Dimens