Thingiverse
TPCast mount to Vive Lighthouse
door Gorobar
3
Downloads
1
Likes
0
Makes
What is this?
Mounting adapter to put the TPCast unit next to the Vive Lighthouse (using the back thread)
TPU parts are optional and should improve friction for less screw tension, so less stress on the parts.
My print
I printed in PETG because I had it available, PLA should work fine as well.
I printed without supports lying on the flat side (see pictures), and with brim (because PET...). PETG part in 0,2mm - TPU in 0,1mm on a Creality CR-10 V2.
BOM
Needs two screws UNC 1/4"-20 x 12mm (~10-15mm should be fine - use additional washer(s) if too long).
General Info
My print had the holes a little too small (typing error in CAD), should be correct now.
Feel free to Remix - CAD files included.
More pictures coming soon.
Mounting adapter to put the TPCast unit next to the Vive Lighthouse (using the back thread)
TPU parts are optional and should improve friction for less screw tension, so less stress on the parts.
My print
I printed in PETG because I had it available, PLA should work fine as well.
I printed without supports lying on the flat side (see pictures), and with brim (because PET...). PETG part in 0,2mm - TPU in 0,1mm on a Creality CR-10 V2.
BOM
Needs two screws UNC 1/4"-20 x 12mm (~10-15mm should be fine - use additional washer(s) if too long).
General Info
My print had the holes a little too small (typing error in CAD), should be correct now.
Feel free to Remix - CAD files included.
More pictures coming soon.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
