TrailCurrent Headwaters Case

TrailCurrent Headwaters Case — Compact Two-Part Enclosure for CM5 + CAN HAT A compact two-part 3D printable enclosure sized for a Raspberry Pi Compute Module 5 on a standard CM5 carrier board stacked with a Waveshare RS485 CAN HAT (B). Clean, stackable form factor with all ports accessible and an embossed TrailCurrent wordmark on the lid. What's in the box Case Bottom — holds the CM5 carrier board and CAN HAT, with cutouts for HDMI, 2× USB 3.0, Ethernet, and the power connector. Case Cover — screw-on lid with an embossed TrailCurrent wordmark and integrated mounting tabs. Hardware it fits Raspberry Pi Compute Module 5 on a standard CM5 carrier board. Waveshare RS485 CAN HAT (B) — provides the CAN interface and additional RS485 I/O. Fasteners you'll need 4× M3 screws for the cover. 4× M2.5 screws and standoffs for the carrier board. Print settings Material: ABS or ASA recommended for vehicle environments (heat-tolerant). PLA works fine for benchtop use. Layer height: 0.2 mm Walls: 3 per