Thingiverse
Triangular Pixel Bird LED Frame
von timid_possum
5
Downloads
4
Likes
0
Makes
This is a LED frame made up of triangular shape cells for use with LEDs/LED strips to create images of various birds.
LED strips are laid into the slots in the back and these illuminate each triangular cell with a color. A sheet of white paper or other diffusion material is placed over the front for each pixel to be lit up evenly. A piece of clear acrylic is needed to hold the paper against the cells. You might not need the acrylic if your diffusion material is stiff enough but I have not tried anything else. Maybe thick Mylar would work? These LED strips are controlled via a Raspberry Pi.
I will later include a separate back for use with flat-top LEDs if you don't want to use strips and a Raspberry Pi. You will be locked into a certain bird color scheme then, of course.
i will also later include the Python script.
This is all very much a work in progress, but I do have the finished prototype done and working but it's really rough right now as you can see in the included pi
LED strips are laid into the slots in the back and these illuminate each triangular cell with a color. A sheet of white paper or other diffusion material is placed over the front for each pixel to be lit up evenly. A piece of clear acrylic is needed to hold the paper against the cells. You might not need the acrylic if your diffusion material is stiff enough but I have not tried anything else. Maybe thick Mylar would work? These LED strips are controlled via a Raspberry Pi.
I will later include a separate back for use with flat-top LEDs if you don't want to use strips and a Raspberry Pi. You will be locked into a certain bird color scheme then, of course.
i will also later include the Python script.
This is all very much a work in progress, but I do have the finished prototype done and working but it's really rough right now as you can see in the included pi
timid_possum veröffentlicht auch auf
41 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
