Triumph Spitfire

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to GrayAt layer #16 (1.36mm) swap to Jade WhiteAt layer #18 (1.52mm) swap to BlackAt layer #23 (1.92mm) swap to Red for the rest.