Thingiverse
Tronxy LCD Screen Offset
von Shtoobs
26
Downloads
10
Likes
0
Makes
This is a Screen Offset I made for the Tronxy XY-2 Pro. This will allow you to mount your LCD screen on either side depending on the offset you choose....left or right. There is a big slot on top that is for a SD card extension...there is an adapter in case you only have a Micro SD card extension, or you can use the drawer adapter for extra nozzles or whatever.
There are three slots for SD cards, a small hook on the side for tweezers, and a little bit of extra storage space on the side as well.
I suggest printing the screen offset on its back with the Tronxy label facing up with tree supports. I also suggest printing the Micro SD Card adapter facing up so you don't need supports for it.
You will need 2x M3 5mm bolts to hold the screen into the adapter and you will need 2x M4 12mm bolts with T-Nuts to hold the screen offset into the extrusion.
*I have now included a unlabeled version in case anyone want to use this offset for a Non-Tronxy printer. The included version i
There are three slots for SD cards, a small hook on the side for tweezers, and a little bit of extra storage space on the side as well.
I suggest printing the screen offset on its back with the Tronxy label facing up with tree supports. I also suggest printing the Micro SD Card adapter facing up so you don't need supports for it.
You will need 2x M3 5mm bolts to hold the screen into the adapter and you will need 2x M4 12mm bolts with T-Nuts to hold the screen offset into the extrusion.
*I have now included a unlabeled version in case anyone want to use this offset for a Non-Tronxy printer. The included version i
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
