Thingiverse
Try Square Version 2
door scottmi
7
Downloads
5
Likes
0
Makes
Calling this the "TRYD&TRUE II" building upon the first version [Fancy Try Square](https://www.thingiverse.com/thing:4651662)
This square is two parts, plus pegs to hold it together. The make you see here uses no glue.
Included is a .stl that includes a tab, if you prefer that style for edge use. I opted for the 'plain' square at this time.
Holes are 1/2" can could be filled with any round stock, dowel, or pipe you like--or nothing and just glue it.
Pegs are .1mm less diameter. To fit, I lightly sanded the inside of the holes, and the outside of the pegs. Wipe off all dust. Put the pegs in the freezer for several minutes. Take pegs out of the freezer one at a time, press with tumb all the way through, flush to table surface. Now as tight and square as can be!
This square is two parts, plus pegs to hold it together. The make you see here uses no glue.
Included is a .stl that includes a tab, if you prefer that style for edge use. I opted for the 'plain' square at this time.
Holes are 1/2" can could be filled with any round stock, dowel, or pipe you like--or nothing and just glue it.
Pegs are .1mm less diameter. To fit, I lightly sanded the inside of the holes, and the outside of the pegs. Wipe off all dust. Put the pegs in the freezer for several minutes. Take pegs out of the freezer one at a time, press with tumb all the way through, flush to table surface. Now as tight and square as can be!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
