Tryton shoes

Use TPU, preferably 0.6 nozzle EU sizes conversion chart: --- AnycubicSlicerNext / Bambu Studio / Orca Slicer settings: Global, Tryton_1:   - layer height: 0.28mm - line width sparse infill: 0.9mm - line width walls: 0.65mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 - sparse infill density: 43% - Infill pattern: Grid - Infill anchor: 1000 (unlimited) - Max infill anchor: 1000 (unlimited) - Infill direction: 0° - infill/wall overlap: 90% - Detect narrow internal solid infill: no - Speed sparse infill: 18 mm/s - Reduce infill retraction: no - Brim type: Outer, 9mm width, 0mm gap - Enable support: yes, normal, auto, 1°, make a 100x150 support enforcer Tryton_1_1: - Walls: 2 Tryton_2: - Walls: 3 Tryton_3: - Sparse infill density: 33% - line width sparse infill: 0.65mm Filament: - Retraction: 2.4mm - Wipe: no - Z hop: 1.2mm, Normal type - Max volumetric speed: 4.8 mm^3/s  --- Video 1: https://www.youtube.com/shorts/FZKIXf9nNCU Video 2: https://www.youtube.com/shorts/_bgXucTOz3k