Tsunade Naruto Hueforge

Project: Tsunade.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 156x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mmFilaments Used: (* = Owned) #000000 * PLA Basic Black Transmission Distance: 0.1 #814100 * PLA Brown Transmission Distance: 2.8 #ffffff * PLA Basic Jade White Transmission Distance: 5.8 #c00d1e * PLA Basic Red Transmission Distance: 3.7 #fce300 * PLA Basic Yellow Transmission Distance: 5.2 #0086d6 * PLA Basic Cyan Transmission Distance: 2.4This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Brown At layer #8 (0.72mm) swap to Black At layer #9 (0.8mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #18 (1.52mm) swap to Jade White At layer #24 (2mm) swap to Yellow At layer #26 (2.16mm) swap t