Tsunade=se-011

Tsunade SE Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 63.46x89mm in sizeYou may print at higher layer heights below the Base Thickness of 0.84mmThe Max allowed Thickness is 2.84mm and the Actual Thickness is 2.84mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments