Turbofan Engine Model

I designed the engine completely myself. It is not meant to emulate a specific engine, but rather to function as a general eye-catcher or ventilator.
After the Printing you have to assemble the parts and fit the electronics. Start with the inner engine by fitting the motor inside as well as the cables. if you wish to paint it is very easy now. After that put the inner engine into the lower shell from the stand and fit the upper part. After that you can fit the back and glue them together. To aviod ugly joints use wood varnish filler and sand the whole thing so it's smooth for painting. After that you can put in the flange and assemble the fan. Thats it. For the stand I used a piece of wood which I milled out at the back for some cable management. I used to screws to fix the parts. I list all the parts you need below.

Flange: 3,17 mm https://www.ebay.de/itm/162814609139
Motor: 12 V DC Motor 10000 U/min https://www.amazon.de/gp/product/B07L8DJR3L/ref=ppx_yo_dt_b_asin_titl