Turtle Climbing Platform

This is a platform for any smaller pets to climb up or go under. There are several .1in x .1in squares on the ramp for grip to make it easier for the animal to climb up on. I also made several .02in groves at the top of the platform to give the animal more grip as well as make it look better and for a place for water to drain out. I also made a version for a 5.5-gallon tank that is slightly longer and has a water dish insert that you can print. The model with the water dish fits on the smaller side of the 5.5-gallon tank perfectly. The water dish is removable to change the water more easily. The largest of the platform option still is able to fit on the short side of a 5.5-gallon tank. The largest option also has a less steep ramp which makes it much easier for any animal to climb up. If you are printing either of the ones with ought the dish holder, I would recommend you use an outer brim as well as set the bed temperature around 75F to keep the edges from warping. There should not ne