Thingiverse
Models
Zum Modell
Twisted Tower
1.1k
Downloads
862
Likes
23
Makes
A twisting tower standing on a very unnatural hill.
You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. My print with 15% infill and 4 top layers had some small gaps.
You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. My print with 15% infill and 4 top layers had some small gaps.
kijai veröffentlicht auch auf
63 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
