Two Face

This was a request from one of my Patreon members. If you have a request, want FREE*Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3DBoost MeBoosts are very much appreciated...Thank YouThe frame I used is a new designe by one of my Patreon members that came out really nicely with a textured build plate. It can be found at https://makerworld.com/en/models/598580#profileId-520703 InstructionsI included 2 different print sizes but feel free to resize, just do not change the Z axisPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with B