Typhoon

I liked the 40mm fang for E3D V6 but I didn't think it was enough air flow. I increased the air flow by changing the size of the airway and upgrading it to a 60mm Noctua fan which provides twice as much flow as 2 blowers.

I do recommend to print in PETG or ABS. If printed with PLA the outlets WILL warp and sag, since are fairly close to the heater block

I typically keep the fan on 60% air flow and 100% while bridging.

this is made to be used with the Aluminium E3D V6 mount found on eBay (link below).

There is another version for the Heavy duty mount made by Chito. I have not tested it. Please let me know if this one works.

https://www.ebay.com/itm/Tevo-Tornado-Creality-cr-10-all-metal-e3d-v6-mount/283008720508?hash=item41e4a25e7c:g:XwoAAOSwWG5apfx9


EDIT: 2018-07-20

I modified the air outlet to the nozzle to help direct air flow better and to make it easier to mount the fang.

TO USE WITH THE EZABL PLEASE FOLLOW THIS LINK

https://www.thingiverse.com/thing