Thingiverse
TzxDuino Reloaded v1.4 Case
von hideehoo
7
Downloads
5
Likes
1
Makes
Simple snapfit case for V1.4 for [arananet's](https://www.thingiverse.com/arananet/designs) TzxDuino project.
https://github.com/arananet/TzxDuino-Reloaded
You may need to tweak the screen cutout size and position depending on which OLED you use. I used the "new" style 0.96" one you find in stores on AliExpress.
The four 6mm tall M2.5 standoff are used to space the screen from the board before you solder it in. Secure the screen to the standoffs with M2.5x5mm screws. You can also use a standard nylon standoff if you don't want to print and thread your own.
DesignSpark file and the STEP file I used to model this around are in my repo
https://github.com/djtersteegc/tzxduino-reloaded-v1.4-enclosure
https://github.com/arananet/TzxDuino-Reloaded
You may need to tweak the screen cutout size and position depending on which OLED you use. I used the "new" style 0.96" one you find in stores on AliExpress.
The four 6mm tall M2.5 standoff are used to space the screen from the board before you solder it in. Secure the screen to the standoffs with M2.5x5mm screws. You can also use a standard nylon standoff if you don't want to print and thread your own.
DesignSpark file and the STEP file I used to model this around are in my repo
https://github.com/djtersteegc/tzxduino-reloaded-v1.4-enclosure
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!