Slicer Discord
Ultimate Eagle Eyes Antenna Tracker – 3D-Druckmodell von Thingiverse Thingiverse

Ultimate Eagle Eyes Antenna Tracker

von Closus
54 Downloads
33 Likes
0 Makes
Zum Modell
Ultimate Eagle Eyes Antenna Tracker
=============================

Introduction
--------------

This is a work-in-progress version of my ultimate antenna tracker for the Eagle Tree Eagle Eyes ground station. It supports 360 degree pan and 180 degree tilt, even with very large antennas (I'm using the TrueRC 2.4G Gatling, which is about 10" by 10"). The whole thing bolts straight onto a Bosch BT150 tripod for easy transportation and disassembly.
Not recommended for long and heavy antennas such as large helicals, yagi etc. since the tilt servo has to work quite a lot and you can't really install a counterweight to balance it (without losing the ability to tilt 180deg).
I've found the tracker to work very well and have used it for long range flights without any issues :)

Feel free to ask any questions!

Installation Instructions
---------------------------

There are no building instructions as I'm not taking apart my tracker again - however I've uploaded tons of pictures t
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen