under desk drawer

Hi, this is a under desk swivel tray i made because i hound myself needing one lol. instructions: Print the three parts. Slide the bracket over the corner of the drawer tray, then insert the rod from underneath to secure it in place.Mount the unit under your desk using 3 × 6G 20mm countersunk screws (or similar). you could also use double sided tape if using it for small stuff.The design can print without supports, but i added them just in case. A small amount of clearance has been built in between the swivel bracket and drawer to ensure smooth operation without sticking.Do not overtighten the mounting screws.Especially avoid overtightening the screw that secures the rod, it only needs to be hand-tight.On first assembly, the swivel action may feel stiff. Gently move the drawer back and forth several times by hand to help the rod bed into the holder.When fully open, the unit is exceptionally sturdy. It has been tested with a 5 kg (11 lb) load on the drawer.Customization options:To have