Underwold 3 poster - hueforge

Hueforge of an advertising poster for Underwold 3 - Rise of the LycansThe photos shows the result in 200*150 and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensionsYou must define the printing parameters indicated in the description below and change the filament on the indicated layers.You can use filaments other than those indicated, but the result will differ.You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.04x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mm Filaments Used: PLA Forshape Black Transmission Distance: 0.2 PLA Sunlu Blue Transmission Distance: 4.1 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: S