Underwold 5 poster - hueforge

Hueforge of an advertising poster for Underwold 5 - BloodwarsThe photos shows the result in 200*150 and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.6mm and the Actual Depth is 1.5mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Marron Red Transmission Distance: 1.3This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap t