Unicorn from Hell

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 1.9mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyTerra Grey Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue Gray At layer #16 (1.36mm) swap to Grey At layer #18 (1.52mm) swap to White for the rest.