Thingiverse

Universal Controller Mount

by RandoEG

75 Downloads

101 Likes

1 Makes

As you can see it's made for about everything.

Few infos, there are two iterations on the wall. In the middle the safeguard is too high for the PS4 joystick, the second iteration is on the PS4 and PS3 which is fine for all the controllers but I found it lacking in stability for the PS4. So there's a third untested iteration in the download.

Now instead of resting on a flat surface, the controller rest on two 7 mm extrusion in an open trapezoid shape, this helps with embracing the back shape of the PS4 controller without being problematic for other controllers. Supposedly...

I've also added more distance from the wall so the triggers can't touch it (to be fair only the PS3 triggers "touched" the wall on the first iteration).

**The screw hole is 4.5 mm.** I've personally used double sided tape and added hot glue to connect the wall and mount on the sides and top.

____

**All of my designs have roughly a 0.1 to 0.3 mm offset/compensation for things to fit together** acco

controller controller holder Controller mount controller stand controller wall mount holder minimalist mount PS3 ps4 switch wall mount xbox controller controller holder Controller mount controller stand controller wall mount holder minimalist mount PS3 ps4 switch wall mount xbox

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

significant post-processing

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer