Universal LED Ring Light Mount

Here is the Universal LED ring Light Mount from my USB Microscope Stand. As for the 3D printed threads, they fit a little tight at first, but if you slowly work them in and out they wear in a little and start to move smoothly. Printing threaded parts at 0.1mm layer height will be helpful (include parts with internal threads)

Build List:

Qty (1) - LED Ring Light Mount (fits 102mm inner diameter 120mm outer diameter LED ring lights)
Qty (3) - M8x1.25 Adjustment Screws


For the printing, I used PLA with a layer height of 0.15mm (0.1mm makes a smoother thread), 3-Layer perimeter, 4-Layer top and bottom layers and 15% infill.

I used this for the LED ring light along with an Arduino for controlling the WS2812B Addressable LEDs (Choose 45 LED version):

https://www.aliexpress.com/item/DC-5V-WS2812B-Module-Strip-16-35-45-Bits-WS2812-5050-RGB-LED-Ring-Lamp-Light/32799365063.html

This is for the smaller ring light mount, these are regular LED (not RGB Addressable):


http: