Thingiverse
USB footswitch
44
Downloads
34
Likes
0
Makes
This is yet another USB footswitch / macro keyboard and I use this as a foot controller for my teleprompter.
The design is based on the Arduino Pro Micro, which features USB HID functionality.
The software can be found here:
https://github.com/tkilla64/footswitch-usb
The following hardware is needed:
6 pcs of M3x6 (DIN 912) Hex socket cap head screws
4 pcs of ST2.2x6.5 self-tapping screws
4 pcs of compression springs 0.7x9x15mm
4 pcs of Cherry MX switches
40x60mm prototype PCB
Arduino Pro Micro
The design is based on the Arduino Pro Micro, which features USB HID functionality.
The software can be found here:
https://github.com/tkilla64/footswitch-usb
The following hardware is needed:
6 pcs of M3x6 (DIN 912) Hex socket cap head screws
4 pcs of ST2.2x6.5 self-tapping screws
4 pcs of compression springs 0.7x9x15mm
4 pcs of Cherry MX switches
40x60mm prototype PCB
Arduino Pro Micro
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!