Thingiverse
Learning
Zum Modell
USB microscope stand
72
Downloads
55
Likes
1
Makes
A simple USB microscope stand for 33mm diameter video microscopes. In the base there are r5x3 magnet slots for e.g. usage with a steel plate.
With the first version you will need to use the ball- attachment fixture that comes with the usb microsopes also one M3 screw and nut to lock the scope to the holder. There is an image taken with a 10 euro video microscope from a 5 euro note where you can see the micro printing features.
I designed a sturdier version of the stand. The joints are to be made with 2 M4 screws and nuts. Probably something like a wing nut might be good.
With the first version you will need to use the ball- attachment fixture that comes with the usb microsopes also one M3 screw and nut to lock the scope to the holder. There is an image taken with a 10 euro video microscope from a 5 euro note where you can see the micro printing features.
I designed a sturdier version of the stand. The joints are to be made with 2 M4 screws and nuts. Probably something like a wing nut might be good.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
