MakerWorld
Other House Models
Zum Modell
Vacuum Bed Riser Battle Kit
12
Downloads
6
Likes
6
Makes
I want the vacuum robot to be able to go below the kid's bed.So here is my solution:Rising the bed by 27mm with the 3D feets + couple of millimeters from the felt patchfeet are designed for a 60mm x 40mm rectangular wooden feet (see pictures)Felt diameter needs to be D35mm or belowCutting about 25mm of wood on one of the side of the bed with a jigsaw and then hiding my crime with a custom piece.That give an additional ~5 cm to the robot to go below the bed, given that the original feet where about 5cm too.Most robot are about 10cm high. I have a roborock (see picture) Print:Advice: Make the feet strong !Assemble:Screw the feet in place with a wood screw (length 30mm or more - Diam 5mm or below)Stick the felt below the feet (D35mm felt of below)Seems a bit specific but I hope it helps someone !
Nautilus Forge veröffentlicht auch auf
49 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
