Thingiverse
Variable bathroom box set
von Empiricist1
247
Downloads
224
Likes
0
Makes
This is a customizable open box set, I designed for organizing my bathroom accessoires, but it can be usable in other contexts, too.
There are 8 different boxes and one tray you can chose from, with different numbers of compartments (from 1 to 6, one with 9, and one with an asymmetric 4x space), to help you organize your bathroom items. The tray is meant to put down your glasses, earrings, watches, etc. at a designated place in your bathroom, while using the bath or shower.
The boxes are 180x180x60 mm - if you need them smaller or bigger, you can scale them up or down (x, y - or if needed also z) in your slicer. This should work fine within reason.
I used PETG, but the prints will also be fine in PLA or ABS for use in a bathroom. I used 0.2mm layer heigth, but 0.3 mm should be fine either. With 0.2 mm the print time is about ~10-14 hours, depending on the type of box and your slicer settings. No supports are needed.
Enjoy!
There are 8 different boxes and one tray you can chose from, with different numbers of compartments (from 1 to 6, one with 9, and one with an asymmetric 4x space), to help you organize your bathroom items. The tray is meant to put down your glasses, earrings, watches, etc. at a designated place in your bathroom, while using the bath or shower.
The boxes are 180x180x60 mm - if you need them smaller or bigger, you can scale them up or down (x, y - or if needed also z) in your slicer. This should work fine within reason.
I used PETG, but the prints will also be fine in PLA or ABS for use in a bathroom. I used 0.2mm layer heigth, but 0.3 mm should be fine either. With 0.2 mm the print time is about ~10-14 hours, depending on the type of box and your slicer settings. No supports are needed.
Enjoy!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
