Thingiverse
Variac Replacement Post Standoff
door thehans
8
Downloads
4
Likes
0
Makes
I ordered a variac a while ago and when it arrived it had suffered some damage from shipping.
The front sheet metal was dented in pretty badly (I had already mostly straightened it out by the time I took the photos), and the insulator/standoff for the posts were damaged. One of them had been completely demolished, two others were cracked but still somewhat held together. Only one of the four original parts was undamaged.
I decided to just replace all of them with printed versions, so I took my calipers to the one intact part, got the dimensions and whipped up a model in OpenSCAD.
I printed them in some grey ABS and reassembled everything. I was quite pleased with the results.
The front sheet metal was dented in pretty badly (I had already mostly straightened it out by the time I took the photos), and the insulator/standoff for the posts were damaged. One of them had been completely demolished, two others were cracked but still somewhat held together. Only one of the four original parts was undamaged.
I decided to just replace all of them with printed versions, so I took my calipers to the one intact part, got the dimensions and whipped up a model in OpenSCAD.
I printed them in some grey ABS and reassembled everything. I was quite pleased with the results.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!