Vase

Hello everybody, I modeled (in onshape) and printed this vase during Open day in my school as a homework with 1mm nozzle. The printing itself is much more quicker than with smaller nozzle.

Here are some settings that I used:

Filament: PLA(240 °C/50 °C)
Layers: 0.5 mm
1st layer 0.4 mm

Perimeters: 2
Infill: 0%

Solid layers:
Top: 0
Bottom: 3

Speeds:
Perimeters: 25 mm/s
External perimeters: 20 mm/s
Infill: 40 mm/s
Travel: 100 mm/s
1st layer: 30 mm/s