Vegeta

VegetaPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.09mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to White for the rest.