Victorian Beach

The Model is 200x200mm in size. X and Y can be adjusted but Z must remain the same. You may print at higher layer heights below the Min Depth of 0.48mm Actual Depth is 2.3mm Filaments Used:   PLA BambuLab Basic Black Transmission Distance: 0.3   PLA BambuLab Basic Gray Transmission Distance: 2.5   PLA BambuLab Basic White Transmission Distance: 6 This print uses 3 unique filaments, Substitute as needed. Swap Instructions:   Start with Black   At layer #10 (0.88mm) swap to Gray   At layer #18 (1.52mm) swap to White for the rest.